Snap Mesh – Posable Pieces

An ongoing problem for the different parts of the workshop is task lighting – the different projects and hobbies require different modes and arrangements of lights for optimal brightness. I wonder if we could use the pre-designed ball-joint connectors from TinkerCad to build a snap together flexible mesh for mounting LEDs for a re-configurable light source for…

Wall Mount Paint Rack

One day you have no enamel paints, the next day you’ve got 23 jars. I needed some way of storing all of my enamel paints, getting them out of the way, while not hiding them away in a drawer. Why not print a solution? View this post on Instagram A post shared by Dwyer Devices (@dwyerdevices) Each…

Sensor Enclosure

A simple sensor enclosure for the 10 year old to do a project with an arduino and an IR sensor. View this post on Instagram A post shared by Dwyer Devices (@dwyerdevices) The base, body, and side isolate a sensor with three wires leading to an external breadboard, while the top secures test material in place….

Park Bench

A doll-house scale park bench roughly based on a common style of bench in New York City’s Central Park. There are two leg widths, and two bench widths in this set. The bench slat widths are 100mm and 170mm, allowing for a wide or compact bench. The legs are provided in 4mm width and 7mm width. View…

Doll House Dining set

A piece of doll-house scale furniture broke as the kids were cavorting around the living room – the project for the morning became designing a replacement, as well as a chair to go with the table. The table is modeled after our dining room table: View this post on Instagram A post shared by Dwyer Devices (@dwyerdevices) The…

4 Kilometer Token

The printer was well past 4 kilometers of printed filament before I noticed. Time for another token! View this post on Instagram A post shared by Dwyer Devices (@dwyerdevices) At the current print velocity, we’ll be adding another kilometer of printed filament nearly every month. Maker: patricknevindwyer Source: 4km Token Model: 4km coin.sl Material: Inland Silver…

3 Kilometer Coin

In the dizzying lead up to the holidays, our Prusa i3 mk2 zipped past the 3 kilometer mark for printed filament: View this post on Instagram A post shared by Dwyer Devices (@dwyerdevices)   Source: 3 Kilometer Token Maker: patricknevindwyer License: Creative Commons – Attribution – Share Alike Material: Inland Egyptian Blue PLA 1.75mm Print…

Undermountain Dungeon – Print 4

We’re building another dungeon, this time the Undermountain. The Undermountain is a series of tunnels and rooms that once belonged to a dwarven stronghold, but have been taken over by an ancient wyrm and its devout goblin worshipers. This is a project spanning lots of different prints, until we generate all of the tiles we need for the…