With Christmas fast approaching, I decided to start designing our family ornament for the year. I wanted it to be simple, but interesting, and identifiably us. I settled on a fairly simple shape with each of our first initials beveled into a cube.
At full scale this was a long print, and the supports were a nightmare. Printing letters vertically makes for a really messy surface on all the sides. I need to find a cleaner way to print these.
- Maker: patricknevindwyer
- Source: –
- Tools: Tinkercad
- License: Creative Commons – Attribution – Share Alike
- Model: custom
- Material: Gizmodorks Translucent Blue PLA 1.75mm
- Scale: 80% for draft test
- Print Date: 2017/11/10
- Print Time: 6 hours 12 minutes
- Estimated Print Time: 5 hours 56 minutes
- Estimated Filament: 38.6 meters
- Slicer: PrusaControl
- Slicer Settings:
- 80% scale
- 0.35mm layers
- include brim
- supports everywhere
- Printer: Prusa i3 mk2
One Comment Add yours