Bestiary – Manticore

A Manticore joins the bestiary of interesting (and quite dangerous) creatures queued up for the adventurers.

The manticore is modeled as five separate pieces. Cleaning up printed sections took a fair amount of effort, as did filing down the wing joints to properly attach to the body. A time consuming build, but a nice result in the end.

  • Source: Manticore
  • Maker: Harrison Baere
  • License: Creative Commons – Attribution – Share Alike
  • Model: [All Files]()
  • Material:
    • Hatchbox Yellow PLA 1.75mm
    • Inland Silver PLA 1.75mm
  • Print Date: 2018/01/29
  • Print Time: 12 hours 25 minutes total
    • body: 4 hours 38 minutes
    • left wing: 2 hours 13 minutes
    • right wing: 2 hours 16 minutes
    • spike: 26 minutes
    • tail: 19 minutes
    • base: 2 hours 33 minutes
  • Cleanup Time: 2 hours
  • Paint Time: 1 hour
  • Estimated Print Time:
    • body: 5 hours 2 minutes
    • left wing: 2 hours 21 minutes
    • right wing: 2 hours 24 minutes
    • spike: 26 minutes
    • tail: 19 minutes
    • base: 2 hours 33 minutes
  • Estimated Filament:
    • body: 4.85 meters
    • left wing: 1.9 meters
    • right wing: 2 meters
    • spike: 0.2 meters
    • tail: 0.2 meters
    • base: 1.6 meters
  • Slicer: Cura 3
  • Slicer Settings:
    • 0.06mm layers
    • 80% infill
    • supports

Leave a Reply

Your email address will not be published.