Going through the various Kickstarter projects we’ve backed recently, picking some models from each
to print and test out. From the SciFi Structures Kickstarter, the pegasus_class_carrier argama.stl:
This ship was an easy print – although the support structures were fairly solid and tucked into tight places, they were fairly easy to remove. The surface detail of the ship shows through really well in gray PLA. While the kids were unsure of the Battlecruiser, this carrier ship convinced them they each wanted a larger fleet of ships.
- Source: SciFi Structures – All Spaceships Pack
- Maker: Project Mobius
- Model: pegasus_class_carrier argama.stl
- License:
- Material: Inland Silver PLA 1.75mm
- Scale: 100%
- Final Size: 46.4mm x 91.4mm x 14.8mm
- Print Date: 2018/03/01
- Print Time: 7 hours 26 minutes
- Estimated Print Time: 7 hours 55 minutes
- Estimated Filament: 6.4 meters
- Slicer: Cura 3
- Slicer Settings:
- include supports
- build plate adhesion
- 50% infill
- 0.06mm layers