A simple, single model Star Wars Imperial Destroyer in the Old Republic style. Adding some variation to the expanding fleets:
To make the printer cleaner, I rotated the model 90° around the x-axis, and scaled the model down to 20% of original size. At full scale, this model is almost half a meter long.
- Source: Star Wars / Old Republic Imperial Destroyer
- Maker: Gargi
- License: Creative Commons – Attribution
- Model: SWTOR_Imp_Destroyer.stl
- Scale: 20%
- Final Size: 53.2mm x 18.5mm x 98.5mm
- Material: Inland Silver PLA 1.75mm
- Print Date: 2018/03/18
- Print Time: 6 hours 28 minutes
- Estimated Print Time: 7 hours 9 minutes
- Estimated Filament: 5.1 meters
- Slicer: Cura 3.2
- Slicer Settings:
- 0.06mm layers
- raft
- supports everywhere
- 40% infill