A slightly more visually complicated ship to build out the fleets. Despite the negative spaces that require supports for printing, this is a fairly easy print to clean up.

View this post on Instagram

A post shared by Dwyer Devices (@dwyerdevices)

• Source: Ulysses 31 Spaceship
• Maker: bobusmalus
• License: Creative Commons – Attribution – Non-commercial
• Model: ulyssell.stl
• Material:
  • Tianse Translucent Green PLA 1.75mm
  • Hatchbox Red PLA 1.75mm
• Print Date: 2018/04/04
• Print Time: 5 hours 44 minutes
• Estimated Print Time: 6 hours 2 minutes
• Estimated Filament: 4.1 meters
• Slicer: Cura 3.2
• Slicer Settings:
  • 0.06mm layers
  • 20% infill
  • Supports
  • Brim