Going through the various Kickstarter projects we’ve backed recently, picking some models from each
to print and test out. From the SciFi Structures Kickstarter, the Pluto Class Mobile Shipyard – Pluto Class Mobile Shipyard – Albion_stretchgoal2.stl
This ship printed quickly, but the cleanup was a bit rough, with a ton of small, and hard to remove, support structures scattered around the print.
- Source: SciFi Structures – All Spaceships Pack
- Maker: @ProjectMobius
- Model: Pluto Class Mobile Shipyard – Albion_stretchgoal2.stl
- License: Commercial
- Material: Inland Silver PLA 1.75mm
- Scale: 100%
- Final Size: 24.7mm x 96.4mm x 12.1mm
- Print Date: 2018/03/6
- Print Time: 5 hours 28 minutes
- Estimated Print Time: 5 hours 41 minutes
- Estimated Filament: 5.3 meters
- Slicer: Cura 3
- Slicer Settings:
- generate support
- build plate adhesion
- 50% infill
- 0.06mm layers