We’re building another dungeon, this time the Undermountain. The Undermountain is a series of tunnels and rooms that once belonged to a dwarven stronghold, but have been taken over by an ancient wyrm and its devout goblin worshipers. This is a project spanning lots of different prints, until we generate all of the tiles we need for the dungeon we have in mind. The prints are spread across:
- Print One – [Enter the Undermountain]()
Enter the Undermountain
Where does the magical portal from the sewers go? To a small cavern, with small tunnels for four portals surrounding an altar chisled from stone. Welcome to the Undermountain.
I’ll print the underlying tiles and corridor walls as the larger dungeon takes shape. Three of the four portal entrances to the Undermountain are controlled by magical spires:
Each of the portal chambers have a single hallway, leading to an altar cut from stone:
- Series: OpenForge Tiles
- Maker: devonjones
- Sources:
- Original License: Creative Commons – Attribution – Share Alike
- Models:
- GCode: –
- Material: Inland Gray ABS 1.75mm
- Print Date: 2017/10/10
- Print Time:
- slottsmollan_obelisk_2x2.stl: 1 hour 14 minutes
- shrine_base_plinth.stl: 1 hour 7 minutes
- shrine_roof.stl: 46 minutes
- Estimated Print Time:
- slottsmollan_obelisk_2x2.stl: 53 minutes
- shrine_base_plinth.stl: 48 minutes
- shrine_roof.stl: 23 minutes
- Estimated Filament:
- slottsmollan_obelisk_2x2.stl: 9.2 meters
- shrine_base_plinth.stl: 5.7 meters
- shrine_roof.stl: 4.2 meters
- Slicer: Slic3r
- Slice Settings:
- 0.35mm layers
- 10% infill cubic
- no supports
- 10mm brim
- Printer: Prusa i3 mk2
One Comment Add yours