Sewer Dungeon – Print Five

We’re building a dungeon. This is a project spanning lots of different prints, until we generate all of the tiles we need for the dungeon we have in mind. The prints are spread across:

Print Five – Deep Sluice and Deep Pool

Continuing the sewer dungeon, we come to the deep sluice and pool. Conveniently 12 tiles fit perfectly onto the print bed for the Prusa i3 mk2, providing for a nicely winding sluice way:

 

As part of the larger dungeon, the deep sluice and pool are perfect for more interesting encounters with aquatic creatures and things that lurk below the surface.

  • Series: OpenForge Tiles
  • Maker: devonjones
  • Model Set
  • Original License: Creative Commons – Attribution – Share Alike
  • Models:
    • sewer_deep_sluice_straight_2x2.stl x5
    • sewer_deep_sluice_tee_2x2.stl x1
    • sewer_deep_sluice_curved_2x2.stl x3
    • sewer_deep_sluice_deadend_2x2.stl x2
    • sewer_deep_pool_cross_e_2x2.stl x1
  • GCode: sewer_deep_sluice_01.gcode
  • Material: Prusa Gray PLA 1.75mm
  • Print Date: 2017/09/23
  • Print Time: 6 hours 37 minutes
  • Estimated Print Time: 6 hours 37 minutes (PrusaControl 0.9.3_390_beta)
  • Estimated Filament: 45.7 meters (PrusaControl 0.9.3_390_beta)
  • Slicer: Slic3r PE 1.37.1
  • Slice Settings:
    • 0.35mm Fast Print
    • 10% infill cubic
    • no supports
    • Brim Size: 2mm
  • Printer: Prusa i3 mk2

Leave a Reply

Your email address will not be published.