We’re building a dungeon. This is a project spanning lots of different prints, until we generate all of the tiles we need for the dungeon we have in mind. The prints are spread across:

• Summary – The Sewer Dungeon
• Print One – Sewer Corners
• Print Two – Sewer Tunnel
• Print Three – Corners and Ladders
• Print Four – Deep Pool
• Print Five – Deep Sluice and Deep Pool
• Print Six – Barred Sewer
• Print Seven – ABS Flooring
• Print Eight – Circular Room Part 1
• Print Nine – Circular Room Part 2
• Print Ten – Circular Room Part 3
• Print Eleven – Bridges
• Print Twelve – So Much Sluice
• Print Thirteen – Magic Portal

Print Seven – ABS Flooring

A simple 2×2 floor piece, done in Gray ABS. This is a test piece, as I finished up a spool of Gray PLA, and am moving on to a series of Gray ABS spools as replacements for the dungeon prints. These simple stone floors will provide the some of the ground for the non-sewer segments of this dungeon:

View this post on Instagram

A post shared by Dwyer Devices (@dwyerdevices)

I like the density and the feel of the ABS for this tile. The color match isn’t perfect (this is a gray filament, the previous tiles were printed with a more silver filament), but the tiles will still work really well.

• Series: OpenForge Tiles
• Maker: devonjones
• Source: OpenForge Sewer Floor
• Original License: Creative Commons – Attribution – Share Alike
• Model: sewer_floor_2x2.stl
• GCode: sewer_floor_2x2_PRUSA ABS_DRAFT.gcode
• Material: Inland Gray ABS 1.75mm
• Print Date: 2017/09/27
• Print Time: 37 minutes
• Estimated Print Time: 34 minutes (PrusaControl 0.9.3_390_beta)
• Estimated Filament: 5.3 meters (PrusaControl 0.9.3_390_beta)
• Slicer: PrusaControl
• Slice Settings:
  • Brim Size: Include Brim
  • 0.35mm layers
  • 10% infill
  • No Supports
• Printer: Prusa i3 mk2